DIY Warm White Pico LEDs on Panel (10-Pack)
SKU:
LEAF01-PWW-10PK-DIY
$24.99
$11.99
$11.99
On Sale
per item
If you're looking to use our warm white Pico LED lights with your own 5V DC project (or if you like mounting LEDs using your own cables instead of ours), then this is the solution for you.
Ten warm white Pico LEDs are mounted on a 0.5mm PC Circuit Board with cutaway tabs for easy removal. The two panels of five LEDs have solder points clearly marked (+ and -). Just solder your own wires and free the LEDs from the panel with sharp cutters. Each LED is just 4mm in diameter. Works with any 5V DC power supply.
Ten warm white Pico LEDs are mounted on a 0.5mm PC Circuit Board with cutaway tabs for easy removal. The two panels of five LEDs have solder points clearly marked (+ and -). Just solder your own wires and free the LEDs from the panel with sharp cutters. Each LED is just 4mm in diameter. Works with any 5V DC power supply.
Here are the technical specs for these lights:
Looking for cables?
Get the same cables we use with our Pico LED lights, complete with small (Pico-size) plug. The small plug is compatible with our dual size expansion boards, and many other vendors' products, as well: DIY Pico Cable with Bare End.
Or, you can go to our DIY Section to check out bulk cable options without plugs, to do your own thing.
NOTE: This is a Do-It-Yourself (DIY) product, and requires soldering to use.
- Operating Voltage: 5 volts DC
- LED Forward Voltage: 3.2 volts DC
- LED Operating Current: 15 mA
- LED Luminous Intensity: 180 mcd
- LED Color Temperature: 2500 K - 3200 K
Looking for cables?
Get the same cables we use with our Pico LED lights, complete with small (Pico-size) plug. The small plug is compatible with our dual size expansion boards, and many other vendors' products, as well: DIY Pico Cable with Bare End.
Or, you can go to our DIY Section to check out bulk cable options without plugs, to do your own thing.
NOTE: This is a Do-It-Yourself (DIY) product, and requires soldering to use.