These lamp posts are just like the posts that come with your LEGO® sets, with one small improvement that makes all the difference: they have been hollowed out and a warm white Brickstuff Pico LED has been mounted on the top. A 24-inch (60.9cm) connecting cable with large plug on the end extends down through the lamp post and out the bottom.
Because the cable wires are so thin and durable, you can easily run it between studs, and snap plates, tiles, and bricks on top of the wire, so you don’t need to modify your build to bring your model streets to life!
This kit includes:
Linking: These lamp posts have large Brickstuff power plugs, so they can be attached directly to any Brickstuff power supply. You can add a a 10-Port Expansion Board to connect up to eight lamp posts or other lights to a single power supply, or cascade multiple expansion boards to connect 100 lights or more.
Compatiblility: You can also use these with other brands of lighting products such as Vonado, Light My Bricks, LeLightGo, Briksmax, Lightailing, Game of Bricks, and any company whose LED lights use a small plug that matches our original Pico connecting plug, by adding a Dual Size Expansion Board.
Adding Lighting Effects:
To create a flickering effect, you can add our optional Single Function Lighting Effect Controller (LEC). By alternating connections to Channel 1 and Channel 2 of the LEC, your lamp posts will have a more realistic alternating flicker effect. See the video below for an example of eight lamp posts connected to a LEC using this configuration.
NOTE that since these lamp posts have large plugs, they can only connect to our Single Function LEC, not our Micro LECs (Flickering, Burned Out Bulb, etc.).
Because the cable wires are so thin and durable, you can easily run it between studs, and snap plates, tiles, and bricks on top of the wire, so you don’t need to modify your build to bring your model streets to life!
This kit includes:
- One modified LEGO® lamp post with warm white Pico LED pre-installed
- One 3-Port Expansion Board for connecting to a power supply (sold separately).
Linking: These lamp posts have large Brickstuff power plugs, so they can be attached directly to any Brickstuff power supply. You can add a a 10-Port Expansion Board to connect up to eight lamp posts or other lights to a single power supply, or cascade multiple expansion boards to connect 100 lights or more.
Compatiblility: You can also use these with other brands of lighting products such as Vonado, Light My Bricks, LeLightGo, Briksmax, Lightailing, Game of Bricks, and any company whose LED lights use a small plug that matches our original Pico connecting plug, by adding a Dual Size Expansion Board.
Adding Lighting Effects:
To create a flickering effect, you can add our optional Single Function Lighting Effect Controller (LEC). By alternating connections to Channel 1 and Channel 2 of the LEC, your lamp posts will have a more realistic alternating flicker effect. See the video below for an example of eight lamp posts connected to a LEC using this configuration.
NOTE that since these lamp posts have large plugs, they can only connect to our Single Function LEC, not our Micro LECs (Flickering, Burned Out Bulb, etc.).
NOTE: This is not a LEGO® product. This kit contains re-used LEGO® elements in new condition that have been repackaged or altered from their original form. LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this product.
