Extend Your BrickPixel Setup Horizontally Without Wires
We designed the BrickPixel™ Smart Lighting System to allow you to create incredible, large-scale lighting setups with complex effects, all managed from a single effect controller and using easy-to-understand components.
This pair of horizontal BrickPixel™ connectors will allow you to extend your setups between modules without needing to connect and disconnect wires—this makes setup and take-down quick and easy. The connectors fit into a 2-stud-wide space, and the low-profile of these connectors also makes them compatible with the MILS standard.
These connectors provide a sturdy power and signal connection via small, spring-loaded connecting pins. We had the pin connectors specially designed for us, so you won’t find them anywhere else.
We make these connectors by hand in our shop in Minnesota, USA.
Please note that the connectors are not magnetized. They require pins, plates/bricks, or the weight of larger buildings/modules to hold the two connectors together. Since LEGO® modular buildings have these pins in place as part of their construction, no additional parts or adjustments are needed to hold the connectors together.
This is a pack of one male and one female BrickPixel™ horizontal connector. LEGO® parts for mounting are also included (color of LEGO® parts may vary depending on part availability). To use these connectors, you will need a compatible main controller as well as BrickPixel™ connecting cables (both sold separately). If you are looking to connect older BrickPixel™ boards (such as our BRANCH09 or BRANCH09X) which have large 3-wire connecting plugs, you will need a set of large-to-small BrickPixel™ conversion cables.
LED lights, BrickPixel™ connecting cables, BrickPixel™-compatible effect controller, and power source are sold separately
This pair of horizontal BrickPixel™ connectors will allow you to extend your setups between modules without needing to connect and disconnect wires—this makes setup and take-down quick and easy. The connectors fit into a 2-stud-wide space, and the low-profile of these connectors also makes them compatible with the MILS standard.
These connectors provide a sturdy power and signal connection via small, spring-loaded connecting pins. We had the pin connectors specially designed for us, so you won’t find them anywhere else.
We make these connectors by hand in our shop in Minnesota, USA.
Please note that the connectors are not magnetized. They require pins, plates/bricks, or the weight of larger buildings/modules to hold the two connectors together. Since LEGO® modular buildings have these pins in place as part of their construction, no additional parts or adjustments are needed to hold the connectors together.
This is a pack of one male and one female BrickPixel™ horizontal connector. LEGO® parts for mounting are also included (color of LEGO® parts may vary depending on part availability). To use these connectors, you will need a compatible main controller as well as BrickPixel™ connecting cables (both sold separately). If you are looking to connect older BrickPixel™ boards (such as our BRANCH09 or BRANCH09X) which have large 3-wire connecting plugs, you will need a set of large-to-small BrickPixel™ conversion cables.
LED lights, BrickPixel™ connecting cables, BrickPixel™-compatible effect controller, and power source are sold separately