- Products
- >
- Lighting Effects
- >
- Individual Effect Controllers
- >
- 6-Channel Lighting Control with Marquee Effect
6-Channel Lighting Control with Marquee Effect
SKU:
EFFECT-MARQUEE
$17.99
$17.99
Unavailable
per item
A Brickstuff Exclusive!
This controller makes a theater marquee lighting effect for up to 54 connected LED lights (lights sold separately). Connect six lights to the controller directly, and add more as needed to create a marquee effect with adjustable speed.
Compact Lighting Effect Controller with Marquee Effect
One of our most-requested lighting effects! This compact little lighting effect controller (29mm x 15mm / 1.14" x 0.6") operates a marquee effect in one of four selectable speeds. The effect controller has six outputs, so you can connect up to six LED lights directly (sold separately). Using BrickPixel™ Driver Boards and cables, you can expand the size of your marquee to include up to 54 lights, all controlled from this little board!
Below are three demos showing the marquee effect in action with its varying speeds (the demo shows six Pico LEDs connected—these are sold separately and are not included with the controller pack):
Below are three demos showing the marquee effect in action with its varying speeds (the demo shows six Pico LEDs connected—these are sold separately and are not included with the controller pack):
The demo above shows the marquee in its second speed (one speed faster than its slowest speed).
The demo above shows the marquee in its third speed (one speed faster than the demo above).
Finally, the demo above shows the marquee running at its fastest speed.
You use the small button on the controller to set the speed of the marquee, and your setting is saved even when power to the controller is turned off.
All connected LED lights follow the same “group of three” marquee pattern. Since the pattern is written to operate in groups of three lights, you should purchase enough lights to connect in groups of three (otherwise there will be gaps in your marquee pattern).
To use this controller, simply connect Brickstuff Pico LED lights (or 3rd-party lights with the same Pico connector) and a power supply. Any of our EasyLight™ Power Packs or Mini Power Packs will work.
To add more lights to your setup and expand the marquee effect, you can purchase either 6-port or 12-port BrickPixel™ Driver Boards and BrickPixel™ connecting cables (we have 5cm, 30cm, and 50cm lengths).
This effect controller will work with any Brickstuff component that has small plugs, and it is also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of one 6-output lighting effect controller.
Power supply and LED lights sold separately.
You use the small button on the controller to set the speed of the marquee, and your setting is saved even when power to the controller is turned off.
All connected LED lights follow the same “group of three” marquee pattern. Since the pattern is written to operate in groups of three lights, you should purchase enough lights to connect in groups of three (otherwise there will be gaps in your marquee pattern).
To use this controller, simply connect Brickstuff Pico LED lights (or 3rd-party lights with the same Pico connector) and a power supply. Any of our EasyLight™ Power Packs or Mini Power Packs will work.
To add more lights to your setup and expand the marquee effect, you can purchase either 6-port or 12-port BrickPixel™ Driver Boards and BrickPixel™ connecting cables (we have 5cm, 30cm, and 50cm lengths).
This effect controller will work with any Brickstuff component that has small plugs, and it is also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of one 6-output lighting effect controller.
Power supply and LED lights sold separately.