Fluorescent LED Filament with Driver Board, Red (2-Pack)
SKU:
FILAMENT-RD-2PK50
$16.99
$16.99
per item
We've taken our amazingly bright rigid LED filaments and soldered them onto a protective circuit board, so they're ready to go and to use with your existing lights. Use them just like mini fluorescent lights in buildings or to add a futuristic Sci-Fi vibe to any model.
Rigid 38mm Red LED Filaments (Pre-Soldered)
These LED filaments were custom-made for us, and we’ve pre-mounted them for you onto a rigid circuit board frame, complete with a resistor that enables operation from a 5V DC power source. Each has a pre-soldered 50cm (20in) cable with a small plug.
Get up and running quickly by adding a Brickstuff Power Pack (sold separately). Because of the high current consumption of these filaments, we do not recommend using with our Mini Power Packs.
These filaments will work with any Brickstuff component that has small plugs, and they are also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of two 38mm rigid red LED filament lights with protective circuit boards. Each filament consumes between 80mA and 100mA during normal operation, so be sure to use a power source capable of supporting this level of sustained power draw.
Power supply sold separately.
IMPORTANT: Do not power these filaments using more than 5 volts. Doing so will permanently damage the filaments.
Rigid filaments are made from ceramic material, so they are extremely fragile. Use extreme caution when handling rigid filament.
Get up and running quickly by adding a Brickstuff Power Pack (sold separately). Because of the high current consumption of these filaments, we do not recommend using with our Mini Power Packs.
These filaments will work with any Brickstuff component that has small plugs, and they are also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of two 38mm rigid red LED filament lights with protective circuit boards. Each filament consumes between 80mA and 100mA during normal operation, so be sure to use a power source capable of supporting this level of sustained power draw.
Power supply sold separately.
IMPORTANT: Do not power these filaments using more than 5 volts. Doing so will permanently damage the filaments.
Rigid filaments are made from ceramic material, so they are extremely fragile. Use extreme caution when handling rigid filament.