- Products
- >
- Lights
- >
- Specialty Light Packs for LEGO® Sets
- >
- 6-Wide Lightbar with Integrated Effect Controller and Switch (Orange Tiles, Light Bluish Gray Base)
6-Wide Lightbar with Integrated Effect Controller and Switch (Orange Tiles, Light Bluish Gray Base)
SKU:
EL-SP15-OR
$29.99
$29.99
Unavailable
per item
A Brickstuff Exclusive!
These 6-wide lightbars have an effect controller inside and 14 different lighting patterns that can be selected using the supplied touch switch. This is the configuration with orange tiles/LED lights.
Only 1 left!
Get Your LEGO® Vehicles Noticed With This Orange LED Lightbar
We’ve had these LED lightbars with integrated controller on our to-do list for some time now. The controller inside the lightbar has 14 lighting patterns pre-programmed, and also features a “random mode” where the controller will switch patterns every 10 seconds. This lightbar configuration features orange LED Lights (6 total) and transparent orange LEGO® plates attached to a light bluish gray LEGO® tile base. The LEGO® parts are permanently attached to protect the lightbar LED lights and circuitry inside.
We were waiting to release these until we could also include an easy way to change the lighting patterns without needing to remove the lightbar. We’re including one of our new touch switches with this kit; just connect the wire coming from the lightbar to the touch switch, then connect the touch switch to your power source. The touch switch has sticky tape on the “touch” side, so you can mount it inside your vehicle, under the roof, or anywhere there is a mounting distance from the surface of one LEGO® plate or less. Then you can change patterns and activate/de-activate “random mode” by touching that part of your model. Here’s a demo video showing the touch switch and some of the lighting patterns in action:
We were waiting to release these until we could also include an easy way to change the lighting patterns without needing to remove the lightbar. We’re including one of our new touch switches with this kit; just connect the wire coming from the lightbar to the touch switch, then connect the touch switch to your power source. The touch switch has sticky tape on the “touch” side, so you can mount it inside your vehicle, under the roof, or anywhere there is a mounting distance from the surface of one LEGO® plate or less. Then you can change patterns and activate/de-activate “random mode” by touching that part of your model. Here’s a demo video showing the touch switch and some of the lighting patterns in action:
Just connect the touch switch to one of our Power Packs and you’ll be all set.
These lightbars will work with any Brickstuff component that has small plugs, and they are also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of one 6-stud-wide LED Lightbar with transparent orange tiles and orange LED lights, one touch switch for changing patterns, and one power cable. The power cable that connects to the touch switch is approximately 15cm (6in) in length.
Power supply sold separately.
NOTE: This is not a LEGO® product. This product includes genuine LEGO® elements that have been modified by us in our shop.
These lightbars will work with any Brickstuff component that has small plugs, and they are also fully compatible with components from other vendors including Light My Bricks, Vonado, LeLightGo, Briksmax, and others.
This is a pack of one 6-stud-wide LED Lightbar with transparent orange tiles and orange LED lights, one touch switch for changing patterns, and one power cable. The power cable that connects to the touch switch is approximately 15cm (6in) in length.
Power supply sold separately.
NOTE: This is not a LEGO® product. This product includes genuine LEGO® elements that have been modified by us in our shop.